BUS - Photoelectric Amplifier PAB

  • 1-channel BUS amplifier PAB 10 A
  • Range with LT/LR 100 = 18m,
    110 = 40m and 120 = 70m
  • Relay or Transistor output
  • Testinput, Alarmoutput
  • common or individual output with On/Off time delay
download datasheet

  • 2-channel BUS amplifier PAB 20 A
  • Range with LT/LR 100 = 12m,
    110 = 27m and 120 = 47m
  • Relay or Transistor output
  • Testinput, Alarmoutput
  • common or individual output with On/Off time delay
download datasheet

  • 3-channel BUS amplifier PAB 30 A
  • Range with LT/LR 100 = 12m,
    110 = 27m and 120 = 47m
  • Relay or Transistor output
  • Testinput, Alarmoutput
  • Common or individual output with On/Off time delay
download datasheet

General information BUS - photoelectric amplifier

The series consists of PAB 10, PAB 20, PAB 30 and is used in conjunction with a set of remote transmitter LT and receiver LR from the series 100,110 and 120.
The amplifier can be connected with up to 9 amplifiers via BRC-plug (bus rail connector) to form a modular master/slave system with up to a total of 30 channels.

Range with the PAB amplifier

  • PAB 10: LT/LR 100 = 18m, 110 = 40m, 120 = 70m
  • PAB 20/30: LT/LR 100 = 12m, 110 = 27m, 120 = 47m

Modular master/slave system with up to 30 channels possible
Compact housing for DIN rail mounting
PAB amplifiers can be connected via BRC - as an BUS-system
All connections pluggable - short assembly time
Supply voltage 10-30 Vdc or 24 Vac
Testinput
Alarmoutput
Automatic sensor test
Adjustable on/off time delay 0 - 10 sec.
Relay or transistor output
Switch selectable common or individual output
Switch selectable light or dark function
Switch selectable long or short range
Monitor LEDs for power, sensitivity, output
LT/LR LED-drive